Servomotor - streda 2526 - Revision history

Palo at 14:31, 3 December 2025

2025-12-03T14:31:42Z

← Older revision		Revision as of 14:31, 3 December 2025
Line 47:		Line 47:

	void loop() {		void loop() {
	int x = analogRead(0);		int x = analogRead(A0);
	long sirka = 2500 - x * 2000 / 1023;		long sirka = 2500 - x * 2000 / 1023;
	for (int j = 0; j < 5; j++)		for (int j = 0; j < 5; j++)

Palo at 14:18, 3 December 2025

2025-12-03T14:18:35Z

@@ Line 1: / Line 1: @@
 <syntaxhighlight lang="C++">
 #define SERVO 4
@@ Line 31: / Line 33: @@
+     }
+   }
+}
 </syntaxhighlight>

Palo: Created page with " #define SERVO 4 void setup() { pinMode(SERVO, OUTPUT); } void loop() { for (long i = 0; i < 180; i++) { long sirka = 500 + i * 2000 / 180; for (int j = 0; j < 5; j++) { digitalWrite(SERVO, 1); delayMicroseconds(sirka); digitalWrite(SERVO, 0); delay(20); } } for (long i = 0; i < 180; i++) { long sirka = 2500 - i * 2000 / 180; for (int j = 0; j < 5; j++) { digitalWrit..."

2025-12-03T14:00:40Z

Created page with "<syntaxhighlight lang="C++"> #define SERVO 4 void setup() { pinMode(SERVO, OUTPUT); } void loop() { for (long i = 0; i < 180; i++) { long sirka = 500 + i * 2000 / 180; for (int j = 0; j < 5; j++) { digitalWrite(SERVO, 1); delayMicroseconds(sirka); digitalWrite(SERVO, 0); delay(20); } } for (long i = 0; i < 180; i++) { long sirka = 2500 - i * 2000 / 180; for (int j = 0; j < 5; j++) { digitalWrit..."

New page

<syntaxhighlight lang="C++">
#define SERVO 4

void setup() {
pinMode(SERVO, OUTPUT);
}

void loop() {

for (long i = 0; i < 180; i++)
{
long sirka = 500 + i * 2000 / 180;
for (int j = 0; j < 5; j++)
{
digitalWrite(SERVO, 1);
delayMicroseconds(sirka);
digitalWrite(SERVO, 0);
delay(20);
}
}

for (long i = 0; i < 180; i++)
{
long sirka = 2500 - i * 2000 / 180;
for (int j = 0; j < 5; j++)
{
digitalWrite(SERVO, 1);
delayMicroseconds(sirka);
digitalWrite(SERVO, 0);
delay(20);
}
}
}
</syntaxhighlight>